PCT International, a leader in broadband connectivity solutions, continues to empower broadband networks with innovative last mile solutions. From coaxial and connector innovations to drop passives / actives and self-installation kits, PCT International is committed to deliver quality products and services during these challenging pandemic times. Stay tuned for new and innovative inventions being released in 2021 taking broadband networks to the next level.
Author: Rick Haube, PCT Vice President of Sales, 5/01/2019
In the world of HFC, the capacity per subscriber will continue to increase and the key enablers are technology and bandwidth over various transmission mediums. If we had a solution that seamlessly delivered 10G symmetrically with minimal operational and capital expense over the existing HFC infrastructure, it would certainly improve the customer experience.
There’s been a lot of discussions recently surrounding ESD (Extended Spectrum DOCSIS) stretching the bandwidth to 1.8 GHz and perhaps to 3 GHz. Actives and passives at these high frequencies aligned with required specifications (TBD) are simply not ready. Many operators are exploring variations of upstream and downstream band splits i.e. 85/102, 204/258, and so on to get more upstream capacity. These may come with a heavy capital and operational cost in most cases.
1. Changing the bandsplit immediately removes all 2-way actives operating at a different split. Over 98% of N. America uses 5 to 42 MHz upstream and 54 to >1,200 MHz downstream. Drop amplifiers in 30% of the homes, line extender amplifiers, distribution amplifiers and nodes need to be removed / replaced / modified.
2. The upstream cable loss at higher return frequencies creates network design challenges such that the return path cable and passive loss exceeds return path amplification. Time to re-space / re-splice amps. Passives / taps also may need to be replaced.
There is a solution on the horizon that bypasses the amplifiers and uses the 1.2 to 1.8 GHz band delivering gigabit symmetrical services at less than half of the existing upgrade cost without changing band splits that effect the customer experience. The last mile of passive equipment through the multi-taps, in-home coax, connectors and passives will be instrumental for the transmission medium. An efficient path for capacity.
Author: Leonard Visser, PCT VP Engineering, 2/01/2019
Coaxial and fiber cable each have their place, with their own advantages and characteristics. Depending on the application, there may be no “right” or “wrong” answer when choosing their integration into the network. In fact, hybrid fiber / coax systems can combine the benefits of both.
As businesses become increasingly cost conscious, and costs of fiber optic cable and labor remain high, broadband professionals are starting to take a closer look at ways to squeeze more performance from coaxial cable. But before you decide whether coax or fiber is best for your application, there are a few benefits of coaxial cable that you should know about.
1. Coax Supports High Bandwidth Levels
When it comes to bandwidth, there seems to be no end to the increasing appetite of consumers. DOCSIS®3.1 provides support for up to 10 Gbps downstream and up to 1 Gbps upstream over coaxial cable. CableLabs® is conducting research to extend operating frequencies above the current 1 GHz to 1.8 or 3.0 GHz which will open the door to even higher bandwidth.
It is true that fiber theoretically has almost unlimited bandwidth, but tapping this bandwidth is much more difficult and often more expensive compared to coaxial cable implementations. Previously unknown obstacles, such as optical beat interference (OBI), could plague the rollout of fiber solutions. Coax is inherently OBI free!
2. Coax is Easy to Install
Let’s face it, coaxial cable is relatively easy to install and fiber can be a real pain. Coax can be installed using simple hand tools regardless of the cable size. There is only one conductor to deal with and it is large enough to easily see what you are doing. Fiber, on the other hand, often requires fusion splicing equipment, precise alignment, bulky splice enclosures, etc.
In the home, coaxial cable can be easily split and extended by the home owner. Currently, connected devices have RF (radio frequency) input / outputs, not optical, so higher cost media conversion is not needed. Damaged coaxial cable is easily repaired and weatherproofed without the need of fusion splicing and a splice enclosure.
3. Coax is Easy to Locate
It is often necessary to locate cable buried in the ground or behind walls. Because coaxial cable is metallic, it is easy to attach a tone generator to the shield and locate the cable. Fiber, on the other hand, is non-conductive and very difficult to locate. To avoid expensive digging and accidental damage, some fiber cables have an embedded wire to provide toning capability – but no other purpose. Coaxial cable does not require this baggage.
4. Coax Can Provide Power
Electronic devices require power to operate and coaxial cables can supply that power because they are metallic. Fiber cables, on the other hand, are non-conductive and cannot provide electrical power. Network powered modems for example can keep potentially lifesaving internet phone service working during local power outages or fire.
5. Coax is Rugged
Bad things happen and coaxial cables have superior resistance to cut through, crushing and bending. Hair thin fibers are easily broken so they must have lots of strength members, gels, yarns, armoring, and sheathing around them to resist becoming broken or micro-bent.
Would the benefits of coax satisfy the requirements of your next project? Visit pctinternational.com to learn more.
From: Adrian O’Leary, President, PCT International, Inc.
I was visiting an operator’s facility about a year ago and saw numerous recycle bins behind the fence. At first I thought “that’s terrific recycling.” There were empty cable reels overflowing and bails of cardboard stacked high. Well, progress in this area eliminated shipping reels and cardboard with drop coaxial cable and a reel-less system was introduced. Yes there are “reel-exchange” programs but that’s not the “reel” solution.
A good coaxial reel-less solution utilizes coils that drop into an ergonomic carrying bag made with recycled materials. Just one carrying bag with a re-usable reel allows coils to be repeatedly drop into place.
How much recycling is eliminated? For 10 million subscribers (roughly 10% of the USA) about 750,000 reels are eliminated from recycling in a single year. For the USA that is over 7 million reels annually. Put that in perspective, and we could replicate the height of 50 Empire State Buildings.